The profile of the Tailhook S&W M&P15-22 Extractor has been enhanced from the stock extractor to provide a strong, aggressive hook, which holds onto the rim of the cartridge for extremely positive extraction.
Extra clearance has been added to prevent the build-up common in some .22LR ammo, which reduces overall effectiveness.
The tip of the “hook” pushes against the cartridge and down on the rim to hold it in place during ejection. The leading edge has been manufactured to not hit the extractor cut-out in the breech, and does not move away from the rim, unlike factory extractors or those from other manufacturers.
The Tailhook S&W M&P15-22 Extractor is machined from the finest non-rusting knife steel available, using a wire electrical discharge machining (EDM) process. Next, the extractor is heat-treated to maximize the properties of the metal and ensure that the critical edge does not dull.
It also has an exclusive plunger pivot action, which reduces the force needed to slip over a round when it’s placed in the chamber by hand.
*** The high-quality replacement extractor plunger for the Smith & Wesson M&P 15-22 has been developed by Tacticool22 to have less friction than the factory plunger with completely new geometry and material.
*** The superior quality Smith & Wesson M&P15-22 extractor spring has been developed by the Tacticool22 R&D Lab to have more tension than the factory M&P15-22 spring. This provides for a superior grip on the rim of the .22 cartridge.
Designed, developed and manufactured in the United States
James L. (verified owner) –
Added this extractor kit to my rifle after I noticed the original unit was not holding the shells hard enough and failure to pull rounds from chamber were jamming gun. I installed this spring , plunger, and extractor to the BCG now the rifle is throwing the spent cases with ease.
Nice little upgrade to fix a simple problem.